for any hardware device you connect to the computer. Plug and play devices (PnP) such as monitors, hard drives, keyboards, etc. do not require us to install any drivers and can be used straight away. However, as all things go, Windows isn’t always successful in auto-configuring the connected devices and sometimes demands manual attention.
HDMI/VGA cable of your second monitor to the CPU, Windows starts automatically setting it up. If it fails to do so, the generic PnP monitor error will be experienced. The error message reads “failed to load hardware monitor driver”. Inside the Device Manager, the newly connected monitor will contain a yellow exclamation mark over it implying that Windows is unable to recognize the device. The issue is most commonly encountered by users who have recently upgraded from Windows 7 or 8 to Windows 10. Other reasons for the Generic PnP Monitor problem are corrupted or incompatible PnP drivers, outdated graphic drivers, missing system files, or faulty connection (cables).
Execute the solutions mentioned in this article one after the other until you are successful in resolving the Generic PnP Monitor problem on Windows 10.
Fix Generic PnP Monitor Problem On Windows 10
. Other potential solutions to the problem are fixing any corrupt system files and updating to the latest version of Windows.
Method 1: Reconnect the Cables
Firstly, as trivial as it may sound, try reconnecting the monitor’s power and HDMI/VGA cable once again. Before reconnecting, blow some air gently into the ports to remove any dirt that might be clogging the connection. If you have another set of cables handy, use them and check if the same issue arises.
1. Close all your active application windows, click on the Power icon in the Start menu, and select Shutdown.
2. Once the computer has completely shut down, turn off the power switch and carefully disconnect the monitor’s power cable.
3. After 10 minutes, remove the video cable connecting the monitor with your CPU.
4. Leave both the cables disconnected for 10-15 minutes and then plug them back into their respective ports.
5. Start your computer and check if the Generic PnP Monitor issue persists.
Method 2: Uninstall Generic PnP Drivers
As mentioned earlier, users do not need to install drivers for PnP devices such as monitors, they are automatically configured. Whenever Windows fails to recognize/configure a connected device, it installs some generic drivers in an attempt to resolve the issue. Sometimes, these generic drivers will be outdated or not compatible with the hardware and result in the Generic PnP problem. In such a case, users should remove the current drivers and let Windows search for new ones.
. You can also directly search for the same in the Cortana search bar.
or single click on the arrow to its right to expand.
6. Restart your computer and Windows will automatically install the drivers again.
Also Read: How to Fix Monitor Screen Flickering Issue
Method 2: Update Generic PnP Drivers
If the drivers installed by the OS do not solve the issue, users should manually update them. You can also download the most up-to-date drivers from the manufacturer’s website and install them like you would install any other application (.exe) file.
Windows will scan the world wide web for any new & updated drivers available for your computer and install them automatically.
4. If Windows fails at finding updated driver files, click on Browse my computer for drivers.
to install them. Wait for the installation process to finish and close all the active Windows.
Method 3: Update Graphics drivers
Apart from updating the PnP drivers, many users have also solved the issue by updating their graphics card drivers. The process is similar to updating PnP drivers.
and let Windows look for updated drivers.
4. Restart the computer after updated drivers have been installed.
Method 4: Run a System File Checker scan
On rare occasions, a new Windows update may corrupt certain system files and prompt a number of issues. A virus attack or a malicious application can also be the potential culprits messing around with system files and drivers. To perform an antivirus scan first, uninstall unknown malware, and then use the system file checker utility to fix any corrupt or missing system file.
in the elevated window and press enter to execute the command.
3. The verification will take more than a couple of minutes to reach 100%, do not close the Command Prompt window before the verification is completed. Once the scan concludes, Restart the computer.
Also Read: How to Remove Malware from your PC in Windows 10
Method 5: Update Windows
Finally, if the issue is being caused due to any bug in the current version of Windows on your computer, you will need to either revert back to a previous version or update it to the latest one.
1. Press the Windows key + I to open Settings and Click on Update & Security.
button. If there are any new OS updates available, download and install them as soon as possible.
- How to Change the Primary & Secondary Monitor on Windows
- Fix Second Monitor Not Detected in Windows 10
- How to Fix Corrupted Registry in Windows 10
We hope this article was helpful and you were able to fix the Generic PnP Monitor problem on Windows 10. For any more help on this topic or anything else for that matter, drop in a Hi! in the comments below.